Home » Products » Spray Booth » Bus Spray Booth » BZB-FB-2000 20m Bus Spray Booth
inquiry form
BZB-FB-2000

20m Bus Spray Booth

Strengths
This BZB-FB-2000 20m bus spray booth can be applied in the repair and manufacturing of diverse transportation tools, including trains, large-sized trucks, non-standard large workpieces, and the large bus of 18m long, among others. While designing this product, we take the needs of high-end clients into consideration.

Characteristics
1. Wallboard
The polystyrene board of 75mm thick gives wonderful thermal insulation and fire resistance. The color coated steel plate is 0.476mm thick. In addition, the wall panel of the chamber is supported by the steel column and the composite beam.

2. Philips Light Tubes
All light tubes are equipped with the branded electronic ballast. They can perform better than the formerly used electronic lamp.

3. Fans
This 20m bus spray booth is designed with 6 sets of 7.5kW centrifugal fans for supplying air, as well as 3 sets of 15kW belt-driven fans with large impellers for exhausting air. In this way, the air circulation ratio inside the chamber is pledged, and the paint mist can be discharged conveniently.

4. Burners
Three sets of RG5S type burners come from Italy Riello brand.

5. Options
A three-dimensional car driven by power can be selected. Moreover, this product can come without the trench, and then the return air is obtained from the side.

Configuration List
External Dimension (mm) Internal Dimension (mm) Gate Size (mm) Total Power (kW)
20146×6896×5600 20000×5000×5000 4400(width)×4500(height) 85
Trench 1. This 20m bus spray booth is mounted with two rows of trench for discharging the air.
2. Each row of the trench is designed with the dimension of 18000×840mm (L×W).
3. Furthermore, the trench is covered with the galvanized floor grille.
Front Door 1. Four single doors are utilized.
2. The frame of the door adopts the folded edge which is formed of the painted steel plate.
3. The EPS board acts as the wall panel.
Service Door 1. There are two service doors with the dimension of 700×2000mm (W×H).
2. The door is provided with the pressure lock.
Chamber 1. The ceiling panel takes advantage of the 50mm EPS insulation board.
2. The wall is supported by the steel reinforcing rib, and the ceiling is provided with the steel composite beam.
3. The insertion type polystyrene board has strong fire resistance and superb thermal insulation. The wallboard is 75mm thick and 1150mm wide. The color coated steel plate possesses the thickness of 0.426mm.
Cabinet 1. The air is supplied from the side, and discharged from the back.
2. The framework is constructed from the coated section bar.
3. The outer layer is formed by the coated plate. The inner layer is the galvanized steel plate. The middle layer offers the function of keeping warm.
Air Supply System (3 sets) 1. This 20m bus spray booth utilizes 6 sets of double-inlet centrifugal fans for supplying air.
2. The fan is provided with the model of YDW5.6M, the power of 7.5kW, and the flow rate of 20,000m3/h.
Air Exhaust System (3 sets) 1. This system includes three sets of 15kW centrifugal type large-impeller exhaust fans with the model of 4-82. The motor is placed outside.
2. This fan is driven by a belt. It gives the air capacity of 36, 000m3/h.
3. The exhaust duct consists of the high-grade galvanized steel plate and the professionally made flange. Moreover, it is installed with a manually adjustable damper.
Heating System (3 sets) 1. The heating system contains three sets of RG5S type Riello burners with the maximum heating value of 780,000Kcal/h.
2. The exchanger is made from the premium-quality SUS304 stainless steel in use of argon arc welding technology.
3. The heat generator has gone through the surface costing process.
4. The electric actuator is imported from Switzerland with original packaging. It can realize the automatic transfer of paint spraying and curing.
5. The highest temperature reaches 80 degrees Celsius.
Filter System 1. Firstly, the inlet air is primarily filtered.
2. Various types of filter are adopted, including the high-grade ceiling filter, the glass fiber filter, as well as the activated carbon being placed horizontally.
Lighting System 1. Side of the Ceiling: 26groupsx4pcs=104pcs 18w LED light tubes
2. Side of the Waist: 18 groupsx2pieces=36pcs 18W LED lamps
3. Each unit of the dedicated electronic ballast is connected with 2 light tubes.
4. The intensity of illumination reaches 800Lux.
Electric Control System 1. This system is controlled by a push-button panel, and the main circuit is designed with multiple protective functions.
2. Our 20m bus spray booth comes with the lighting switch, timer, temperature limiter, failure alarm, emergency stop switch, paint-curing switch, temperature and time settings, room-temperature or constant-temperature paint spraying, and some others.

Related Names
Coach Paint Booth | Vehicle Body Paint Equipment | Auto Paint Refinishing Booth

Related products
Inquiry Form
Product List

Add.: No.6-101, Industrial Zone of Hongqi Dangong Road, Zhongluotan Town, Baiyun District, Guangzhou City, Guangdong Province, China
Tel.: +86-20-66293356
+86-20-37410868
Fax: +86-20-66293300
E-mail: info@gz-btb.com
Contact Person: Phebe Li