Home » Products » Automotive Maintenance Equipment » Car Polisher » Car Polisher (Automatic Sanders with Dust Extraction System, Model V9)
inquiry form

Car Polisher (Automatic Sanders with Dust Extraction System, Model V9)

The car polisher with dust extraction system has high working efficiency, because it is equipped with Y-type hosing fitting, enabling simultaneous working of two vacuum grinders.

Features
1. Thanks to the smart design, the working efficiency of the eco-friendly car polisher has been increased by 80%.
2. The central dust collection system ensures clean and health environment.
3. Our car polisher is installed with automatic switch, low noise motor imported from Germany, and poweful suction device.
4. In idle state, this portable car polishing equipment will stop 10-20 seconds later. So, dust in the pipe can be collected, completely.
5. The main cabinet of the automotive maintenance device is desinged with a rack. The multiple compartments makes it easier for the user to place the sandscraper and the auxiliary tools.

Technical Parameters
Model V9
Voltage 220V/50Hz
Power 2500
Amount of dust 230m3/h
Capacity 60L
Pipe length 7.5m
Working pressure 10MPa
Spare Parts List for Car Polisher
1) 6"(152mm) central vacuum grinder (polisher)
Ergonomically designed, the central vacuum grinder of the car polisher is made of composite material and has low centre of gravity. The easy handling effectively relieves user’s fatigue during working. The central vacuum grinder generates little vibration during operation. The light weight makes this product quite comfortable for use. Even in winter, user will not feel cold when holding the grinder. This product is widely used for surface grinding and polishing.

Speed: 12000rpm
Eccentricity: 5mm
Net weight: 0.85kg
Air consumption: 0.48m3/min
Working pressure: 6.3kg/cm2
1
2) 3×7"(75×175mm) central vacuum grinder
This central vacuum grinder of the car polisher has high working efficiency. Made of composite material, the vacuum grinding tool has low center of gravity. Thanks to the ergonomic design, this product has light weight for easy handling. In the meantime, little vibration will be generated during operation. So, users will not feel fatigue even working for a long time. This product is an ideal tool for surface grinding and polishing.

Speed: 10000rpm
Eccentricity: 4mm
Net weight: 0.9kg
Air consumption: 0.48m3/min
Working pressure: 6.3kg/cm2
1
3) 5"(127mm) central vacuum grinder 1
4) Manual plane with 15 holes for small area 1
5) 70×195mm manual plane with 11 holes for large area 1
6) Vacuum pipe
The vacuum pipe of the car polisher has optimal corrosion resistance. It is connected to the vacuum grinder for air supply and dust collection.
1
7) Combined type vacuum pipe
The vacuum pipe can be connected with two grinders, synchronously.
1

Consumables
To extend the service life of sandpaper, user shall make sure the sandpaper and the polished surface is clean and dust-free. The outstanding cutting force of the sandpaper ensures high polishing efficiency and outstanding grinding effect.

Sandpaper
40#-1200# yellow sandpaper The yellow sandpaper is the first choice for polishing and grinding. Economical and practical, the yellow sandpaper for car polisher enables first-class surface grinding effect. 5 inch 0.9/piece 100pcs/box
95×180mm 1.2/piece 100pcs/box
6 inch 1.4/piece 100pcs/box
95×180mm 1.2/piece 100pcs/box
40#-1200# high abrasion resistant green sandpaper The green sandpaper with excellent abrasion resistance uses semi-open sand-planting method (alumina particles), and in the above attached a special coating to improve sandpaper abrasion resistance 95×180mm 1.6/piece 100pcs/box
6 inch 1.9/pcs 100pcs/box
95×180mm 1.6/piece 100pcs/box
5 inch 1.5/piece 100pcs/box
40#-800# mesh sanding sheet Dust-free mesh sanding sheet for car polisher is a piece of smooth sandpaper with mesh. It contains thousands of small holes to provide good cleaning effect. 6 inch 3/piece 100pcs/box
95×180mm 3/piece 100pcs/box
Related products
Inquiry Form
Product List

Add.: No.6-101, Industrial Zone of Hongqi Dangong Road, Zhongluotan Town, Baiyun District, Guangzhou City, Guangdong Province, China
Tel.: +86-20-66293356
+86-20-37410868
Fax: +86-20-66293300
E-mail: info@gz-btb.com
Contact Person: Phebe Li